Q Tape, Pr. - 9ft x 1/2" Roll (3190)

Description of Q Tape, Pr. - 9ft x 1/2" Roll

Negative Polarity Tape for Unique Vastu and EMF Applications

Q-TapeTM is a brand new breakthrough in Vastu remediation.
(Vastu is the science of creating a highly beneficial living environment).
Q-TapeTM is made from a special metal alloy which
includes 4-polarity lead for its classical Vastu properties of radiation
absorption and protection. Q-TapeTM is easy to cut with scissors,
and after peeling off the backing, its sticky surface makes
it simple to apply to a surface. It can also be taken off a surface
fairly easily if it needs to be repositioned and then replaced.

Polarity Balancing
Q-TapeTM is very unusual in that it has a highly negative polarity.
(Most metals have a net positive polarity.) This makes Q-TapeTM
the perfect element to balance highly polarized electrical currents
which saturate all the walls of your home.

EMF Balancing
The current flowing through electrical wires has a net positive
charge. Q-TapeTM has a strong negative charge. When a small
amount of Q-TapeTM is placed inside an electric box, the yin (QTapeTM)
and yang (electrical current) become balanced and the
walls in your home or apartment “turn on” with a nicely resonant,
balanced polarity.

When opposing polarities are combined such as these, they can
release a virtual shower of shimmering, high energy bio-energetic
resonance.

Directions
For a house: Place a strip of Q-TapeTM (1/2”x1”) with an Alpha-
Dot inside your circuit breaker box. If your breaker box is too
flat and there is no room at the top inside your breaker box, then
place the strip above the breaker box door, outside the box.

For an apartment: For an electrical circuit box in your apartment,
follow the same procedure as above.
Remember, when handling an alloy, wear protective gloves and/
or wash your hands after handling.

Regular Cell Phone - Place one set of two 1½  x  ¼ inch strips of Q-Tape™ (double layered) on top of  the battery area or on the underside of the battery cover lid that covers the battery area. Be sure to place a strip of gaffers’ tape over the Q-Tape™.

iPhone or Blackberry - Place THREE SETS one below the other over the battery area. Be sure to place a strip of gaffers’ tape over the Q-Tape™

Recommended Use for Q Tape, Pr. - 9ft x 1/2" Roll

To balance the EMF stress in your home (or office) due to A/C current, place a ½ inch by one inch strip of Q-Tape™ on the panel inside your circuit breaker box above the circuit breakers. For best effects, be sure to draw the Alpha-Dot symbol directly on top of the Q-Tape (so that it is embedded in the tape). This promotes superior geometric effects for electromagnetic fields. (See example in the photo.) You do not need to use gaffer’s tape on top of the Q-Tape for your breaker box. If your breaker box is very small (and there is no room at the top inside your breaker box, then place the strip of Q-Tape (with the Alpha-Dot symbol) on top of the breaker box, outside the box.

The Alpha-Dot Symbol - Draw on the strip of Q-Tape

Battery-Operated Devices:
For most battery-operated devices, please use a ½ inch by one inch strip of Q-Tape™ covered by a piece of gaffer’s tape. Be sure to remove the backing from the Q-Tape and palce the sticky side down on the device For best effects, be sure to draw the Alpha-Dot symbol directly on top of the Q-Tape (so that it is embedded in the tape). This promotes superior geometric effects for electromagnetic fields. This configuration of Q-Tape with the Alpha-Dot is called the Battery Strip. (We recommend the Pro-Gaff brand of gaffer’s tape.)